Extended Warranties are Available
Description
The ACT-3X Panel Tachometer is a powerful NIST calibrated, fully programmable tachometer and totalizer. It accepts inputs from all Monarch speed sensors or from any standard TTL generating device. The unit operates from 120/240 Vac input power or from 12 or 24 Vdc input power (optional). Programming is easily performed through the 5 front panel pushbuttons or using the free downloadable PM Remote Software. Set up for single-channel monitoring. Programmable scale factor with menu selection for multiple pulses per revolution, linear rates, single event trip speeds (using auxiliary input), and rate of change in RPM. A TTL pulse repeater output is standard. Recommended sensors with PN -W (= tinned leads), ROS-W, ROS-HT-W-25, P5-11, PS-12, M-190W, IRS-W, ROLS-W, RLS-W, SLS-115/230, CSLS, and GE-200HP Gas Engine Sensor (with amplifier).
Features
All models - Universal Input, non-contact operation from optical, infrared, laser, proximity, and magnetic sensors or direct TTL and 200 mV to 50 Vac signals
ACT-3X Panel Tachometer
- 1/8 DIN sized
- 5-digit LED display
- 5 to 999,990 RPM range
- Universal sensor inputs
- NIST Traceable Certificate included
- User-configurable with front panel pushbuttons or free downloadable PM Remote Software
- View real-time data on PC*
- Record data in .CSV format in real time*
- Universal ac power 100-240 Vac, 50/60 Hz or optional 12 or 24 Vdc power
- Standard pulse repeater output
-
Single event capture from start-stop pulses, in units such as MPH, CM/
sec , etc. usingtwo sensors - for the linear rate of travel on the second input channel - Optional 4-20 mA or 0-5 Vdc scalable output
- Optional Ethernet or USB communications
- Optional alarm relay outputs
*If no communications option is ordered, requires USB programming cable and PM Remote Software (free download)
Specifications*
| Speed Range | 5-999,999 RPM (speeds below 5 RPM possible with multiple pulses per revolution) |
| Input Frequency Range | 0.083 Hz to 80 kHz |
| Totalizer/Counter | Display Range: 0.001 to 99,999 |
| Input Configuration | Universal inputs: 1 to 9,999 pulses per revolution front panel pushbutton programmable TTL input and 1.1 V to 50 Vac signals, Opt: -1 to -50 V dc |
| Accuracy | +/-0.001% of reading or +/-1 displayed resolution (standard gate), +/-0.06% of reading or +/-1 displayed resolution (fast gate) |
| Resolution | Up to 0.001 RPM, 10 RPM (100,000 to 999,990 RPM) |
| Display | 5-digit, 0.56 in. [14 mm] high red LED |
| Display and Output Update | Menu-selectable between 0.5 seconds above 120 RPM, 1 second above 60 RPM, and 1.5 seconds above 40 RPM |
| Max Measurement Rate | Up to 100 times per second (Standard Gate) or up to 1000 (Fast Gate) dependent on the input frequency; input must be measurement rate |
| Scaling | Programmable scaling: 0.0001 to 9999.9 (front panel pushbutton programmable) |
| Decimal Point | User-selectable (0-3) decimal places max (front panel pushbutton programmable) |
| Memory | Maximum, minimum, and last reading recall from front panel pushbuttons |
| Dimensions | 1/8 DIN by 4.5 in. [114 mm] deep Panel cutout: 3.58 in. x 1.74 in. [91 x 44 mm] |
| Input Power |
Standard: 100-240 Vac +/-10%, 50/60 Hz Optional: 12 or 24 Vdc +/-20%, isolated, 8VA |
| Inputs | Universal input for optical, proximity, two-wire or three-wire magnetic, infrared, or laser sensors; TTL input or 3.3 Vac to 50 Vac input (The standard input is 1 pulse per revolution.) |
| Sensor Excitation | 5 Vdc or optional 12 or 24 Vdc to sensor |
| Recommended Sensors |
LED - ROS-W High Temp - ROS-HT-W-25 Infrared - IRS-W Laser - ROLS-W, RLS-W, SLS-115/230, CSLS Inductive - GE200-HP Gas Engine (requires amplifier) |
| Pulse Repeater Output |
Standard, 0 to 5 V TTL compatible; one pulse out for each pulse in Menu-selectable polarity |
| Communications | Bidirectional RS232C, USB, or Ethernet interface |
| Analog Output (optional) |
Voltage (AO): 0 to 5 Vdc, 5 mA max load (isolated or non-isolated) or Current (IO): 4 to 20 mA, 500 ohm,¦ max load. (or non-isolated), 1 to 5 Vdc possible using 250 ohm resistor) 16-bit resolution Front panel pushbutton programmable for full scale and offset RPM ranges |
| Pulse Output (optional) | Repeater pulse output: TTL pulse switching between +5 V and ground |
| Alarm Capability |
Two-alarm setpoints: High or Low Front panel pushbutton programmable Hysteresis, deadband, and low limit lockout are programmable; relays can be set as a fail-safe Alarms can be reset manually or automatically; remote reset via the auxiliary input |
| Alarm Outputs | Two Form C relay contacts, rated 1 A at 115 Vac or 230 Vac |
| Remote Programming |
Remote programming is possible using an optional communications interface and PM Remote Software (If no communications are ordered, the unit can still be programmed with an optional USB programming cable.) |
| Environmental |
Indoor use only, installation category II per IEC 664 temperature: -10 °C to 50 °C operating per IEC 61010-1 Humidity: maximum relative humidity 80% for temperatures up to 31 °C, decreasing linearly to 50% relative humidity at 40 °C |
| Electrical Safety | Meets EN61010-1:2001, EC low voltage directive 72/23/EEC and 89/336/EEC |
*Specifications are subject to change without notice.
PM Remote Software
PM Remote Software is a free downloadable Windows-based software application that allows users to quickly and easily customize the configuration of Monarch’s ACT-1B, ACT-3X, F2A1X, and F2A3X panel tachometers. Set the mode of operation to RPM, RPS, or Frequency and select the input scale (pulses per revolution). Real-time data can be displayed directly on the PC along with min and max values. Decimal places and display update rate are user-configurable.
Click here for complete details and to download the software.
Features
- Allows quick setup of ACT-1B, ACT-3X, F2A1X, and F2A3X
- Display live data remotely on PC
- Unit configuration can be saved for reloading in the feature
Click here for complete details and to download the software.
Shipping Codes for ACT-3X Panel Tachometer (all models):
Harmonized Tariff Code: 9029205000
Country of Origin: US
Export Control Classification Number (ECCN): EAR99