Five Models to choose from!
All include an 8 ft. cable, mounting bracket with jam nuts, and 12 inches of T-5 Reflective Tape. ROLS-P-25 and ROLS24-W-25 include a 25 ft. cable.
Buying direct from manufacturer: Tax-Free • Unlimited Tech Support • Free Shipping for orders over $250 in contiguous USA!
1-250,000 RPM. Extremely versatile and able to work over long distances (up to 25 feet). The ROLS-W (tinned wire termination) and ROLS-P (1/8" phone plug termination) are threaded stainless steel remote optical sensors with a visible red laser light source. All these sensors have the On-Target green LED Indicator.
Model ROLS-P: Remote Optical Laser Sensor with 8 ft. cable, 1/8" [3.5 mm] phone plug connector, mounting bracket with jam nuts, and 12 inches of T-5 Reflective Tape
Model ROLS-P-25: Remote Optical Laser Sensor with 25 ft. cable, 1/8" [3.5 mm] phone plug connector, mounting bracket with jam nuts, and 12 inches of T-5 Reflective Tape
Model ROLS-W: Remote Optical Laser Sensor with 8 ft. cable, 3 tinned leads, mounting bracket with jam nuts, and 12 inches of T-5 Reflective Tape
Model ROLS24-W: Remote Optical Laser Sensor with 24 V dc input power, 8 ft. cable, 3 tinned leads, mounting bracket with jam nuts, and 12 inches of T-5 Reflective Tape
Model ROLS24-W-25: Remote Optical Laser Sensor with 24 V dc input power, 25 ft. cable, 3 tinned leads, mounting bracket with jam nuts, and 12 inches of T-5 Reflective Tape
The ROLS is a great accessory for many Monarch products!
W= tinned wire leads, P= 1/8" [3.5 mm] stereo phone plug termination).
|Speed Range||1-250,000 RPM|
|Illumination||Visible Red Laser, Class 2 (per IEC 60825-1:2014)|
|Classification||This product complies with IEC60825-1 Ed. 3 and 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50 of June 2007|
|Max Laser Output||1 mW max|
|Laser Wavelength||650nm (visible red)|
|Beam Divergence||< 18 mrad|
|Beam Diameter||4 x 7 mm typical at 2 m|
|Laser Diode Life||8,000 operating hours MTBF (1-year warranty)|
|On-Target Indicator||Green LED on the wire end cap|
|Operating Range||Up to 25 ft. [7.6 m] and 60 degrees offset from the target|
ROLS: 3.3 – 15 V dc, 0.4W max
ROLS24-W: 24 V dc ±10%, 0.4W max
NOTE: 24 V dc power input option available see ordering information.
ROLS: Open collector with an internal pull-up resistor to supply voltage; positive pulse when target present; Output Voltage = Supply Voltage
ROLS24-W: Open collector with an internal pull-up resistor (5600 ohms) to supply voltage minus ~5V; positive pulse when a target is present
Optional Outputs Available - Open Collector or TTL pulse (3.3 V dc), Negative pulse (contact factory)
|Operating Temp||14 °F to 158 °F (-10 °C to 70 °C)|
|Humidity||Maximum relative humidity 80% for temperature up to 88 °F (31 °C)
decreasing linearly to 50% relative humidity 104 °F (40 °C)
|Connection||3.5 mm [1/8 inch] male stereo plug (ROLS-P);
Tinned wires (ROLS-W)
|Material||303 stainless steel supplied with two M18 jam nuts and mounting bracket|
|Dimensions||Threaded tube 3.12 in. x 0.71 in. diameter [18 x 79.4 mm] long|
*Specifications are subject to change without notice.
Shipping Codes for the ROLS Remote Optical Sensor:
Harmonized Tariff Code: 9031498000
Country of Origin: US
Export Control Classification Number (ECCN): EAR99