Four Models to choose from
All include an 8-foot cable, mounting bracket with jam nuts, and 12 inches of T-5 reflective tape. ROLS-P-25 and ROLS24-W-25 include a 25-foot cable.
1-250,000 RPM. Extremely versatile and able to work over long distances (up to 25 feet). The ROLS-W (tinned wire termination) and ROLS-P (1/8" phone plug termination) are threaded stainless steel remote optical sensors with a visible red laser light source. All these sensors have the "on-target" green LED indicator.
Model ROLS-P: Remote Optical Laser Sensor with 8 ft. cable, 1/8" (3.5mm) phone plug connector, mounting bracket with jam nuts, and 12 inches of T-5 Tape.
Model ROLS-P-25: Remote Optical Laser Sensor with 25 ft. cable, 1/8" (3.5mm) phone plug connector, mounting bracket with jam nuts, and 12 inches of T-5 Tape.
Model ROLS-W: Remote Optical Laser Sensor with 8 ft. cable, 3 tinned leads, mounting bracket with jam nuts, and 12 inches of T-5 reflective tape.
Model ROLS24-W: Remote Optical Laser Sensor with 24 VDC input power, 8-foot cable, 3 tinned leads, mounting bracket with jam nuts, and 12 inches of T-5 reflective tape.
Model ROLS24-W-25: Remote Optical Laser Sensor with 24 VDC input power, 25-foot cable, 3 tinned leads, mounting bracket with jam nuts, and 12 inches of T-5 reflective tape.
Longer Cable Models and Bulk Sensor Cable is available for any of our sensors. Please give us a call or email us for pricing.
SENSORS W=Tinned Wires; P = 1/8" Phone Plug
|ACT-1B||12 Vdc or
Sensors - P = 1/8" Phone Plug
|Palm Strobe x||X||X|
W= tinned wire leads, P= 1/8" (3.5 mm) stereo phone plug termination).
|Speed Range||1-250,000 RPM|
|Illumination||Visible Red Laser, Class 2 (per IEC 60825-1:2014). This product complies with IEC60825-1 Ed. 3 and 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50 of June 2007.
Maximum Laser Output: 1mW
Pulse Duration: Continuous
Laser Wavelength: 650 nm
Beam Divergence: <1.5 mrad
Beam Diameter: 4 x 7 mm typical at 2 meters
Laser diode life: 8,000 operating hours MTBF (1-year warranty)
|On-Target Indicator||Green LED on wire end cap|
|Operating Range||up to 25 feet (7.6 meters) and 60 degrees offset from target|
|Power Requirement *||
* ROLS: 3.3 – 15Vdc, 0.4W max
* ROLS24-W: 24Vdc ±10%, 0.4W max
NOTE: 24Vdc power input option available see ordering information.
* ROLS : Open Collector with an internal pull-up resistor to supply voltage.
* ROLS24-W : Open Collector with internal pull up resistor to ~20V
Both: Positive pulse when target present
ROLS: Output Voltage = Supply Voltage
Optional Outputs Available - Open Collector or TTL pulse (3.3Vdc), Negative pulse (Contact factory)
|Operating Temp||14 deg. F to 122 deg. F (-10 deg. C to 50 deg. C)|
|Humidity||Maximum relative humidity 80% for temperature up to 88 deg. F (31 deg. C)
decreasing linearly to 50% relative humidity 104 deg. F (40 deg. C)
|Connection||3.5 mm (1/8 inch) male stereo plug (ROLS-P) or
Tinned wires (ROLS-W)
|Material||303 Stainless Steel supplied with two M18 jam nuts and mounting bracket|
|Lens||Glass optics mounted in ABS block|
|Dimensions||Threaded tube 3.12 in x 0.71 in diameter (18 x 1.5 x 79.2 mm) long|
Shipping Codes for the ROLS Remote Optical Sensor:
Harmonized Tariff Code: 9031498000
Country of Origin: US
Export Control Classification Number (ECCN): EAR99